Fast Free delivery of all supplies directly to your yacht in Juan les Pins, Golfe Juan, Nice, Monaco, Cap d’Ail, Beaulieu, St Jean Cap Ferrat, Villefranche, Cannes, Mandelieu, St Tropez, San Remo, Imperia, Genova and the shipyards in La Ciotat, Toulon, St Mandrier and Marseille.
Liquid detergent compound containing rust dissolving acids, emulsifiers and passivators.
- Does not contain nonyl phenol ethoxylates or other estrogenic compounds
- Prevents flash rusting
- Surfaces rendered suitable for painting
- Surface brightening
- When cleaning aluminium, brass and copper flush with water upon completion of cleaning
Directions for use
Metal Brite should always be used in a plastic bucket. The acid should always be added to water, never the reverse.
For removal of rust stains and oxide stains on aluminium, brass, copper and stainless steel, apply Metal Brite (after removal of oil and grease) neat with a brush, rag, etc. Wash off after 15 minutes. Repeat if necessary. Do not let Metal Brite dry on surfaces as it may leave a hard white deposit.
For steel surfaces remove oil, grease and old paint. Wet down the entire surface with neat Metal Brite and allow to dry. Second wash may be necessary. Surface should have a grey/white appearance when the Metal Brite is dry. Steel surfaces will have a resistance to rust and will render a good base for paint.
For removal of rust stains on painted surfaces and wood, Metal Brite should be applied at full strength for heavy stains, or diluted to 30–50% for light stains. Allow to soak for 20 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.